Tailored comfort
Setting lights, shutters and air conditioning one by one, room by room, is tedious every day.
Our answer
“Arrival”, “Night” or “Meeting” scenes: a single touch sets everything.
- Home
- Expertise
- Smart building
- Home automation
Home automation
Comfort, scenes and energy management.
- KNXOpen worldwide standard
- ScenesOne touch, several actions
- MobileRemote control
The challenges
What is at stake
Lighting, blinds, air conditioning and scenes controlled from smart switches, a touch panel or a smartphone: for upscale residences, villas and offices.
Consumption under control
Lights left on and air conditioning in empty rooms weigh on the bill.
Our answer
Presence detection, time scheduling and an all-off switch when leaving.
Technology that lasts
A closed system depends on a single manufacturer; if it disappears, the installation is orphaned.
Our answer
The open KNX standard: hundreds of manufacturers, an installation that can grow.
The building in your pocket
Checking that a door is closed or starting the air conditioning before you arrive should be simple.
Our answer
A secure mobile app and notifications.
Architecture
An architecture designed in layers
Every switch, sensor and actuator is connected to the same bus: they understand each other and are programmed together, without rewiring.
Every installation is delivered tested, labelled and documented, for simple operation and maintenance.
- Layer 01
Controls
Smart switches, touch screens and a mobile app.
- Layer 02
Sensors
Presence, light level, temperature, window opening.
- Layer 03
KNX bus
A single cable connects every device and carries the commands.
- Layer 04
Actuators
Modules in the switchboard for lighting, dimming, shutters and air conditioning.
- Layer 05
Gateway & remote access
Secure remote control and links with other systems.
Services
Our services
Study of uses and scenes
We start from the way you live or work to define useful scenes.
Lighting and dimming
Switching, dimming and lighting moods, with presence detection.
Shutters and blinds
Central and automatic control according to time, sun or wind.
Air conditioning and heating
Room-by-room control and automatic shut-off when a window is open.
Mobile control
A secure app to control and monitor remotely.
Occupant training
A simple handover and documentation given to the occupants.
Technologies we master
KNX certified
KNXScenesMobile controlDimmable lighting
KNX certified
Method
Our method, step by step
- 1
Uses & scenes
Rooms, habits, desired scenes and planned changes.
- 2
KNX design
Product selection, bus and switchboard diagrams.
- 3
Installation
Bus wiring, switchboards, controls and sensors.
- 4
Programming
ETS configuration, scenes and mobile app.
- 5
Handover
Demonstration, adjustments and documentation.
Standards
Compliance with standards
- KNX (ISO/IEC 14543-3)Building bus
- ETSOfficial KNX programming software
- DALI (IEC 62386)Lighting control
- IEC 60364Electrical installations and earthing
Deliverables
What we hand over to you
- Bus and switchboard diagrams
- Saved ETS project
- List of programmed scenes
- User guide for occupants
- Access to the mobile app
Maintenance & 24/7 support
This system can be covered by a preventive and corrective maintenance contract, with priority response on critical sites.
See the plansCan home automation be installed in an existing building?
Yes. The KNX bus is installed during a renovation, and wireless solutions fill in where cabling is difficult.
What happens if the Internet is down?
The installation keeps working normally: only remote access is interrupted.
Is it complicated to use?
No. Switches remain familiar and scenes make daily life simpler. We train every occupant.
Are you KNX certified?
Yes. SSP Group is KNX certified: our installations follow the standard’s design and programming rules.
Let’s talk about your site
A project, an installation to take over or to maintain?
Our engineers study your needs and reply within 48 business hours with initial technical and budget guidance.